Unfortunately, I had just broken my jaw and had surgery to put in plates TWO days before DragonCon2015 began! My face looks weird in all of these pictures, but at least I made it. I also was on heavy duty painkillers and unable to eat anything except smoothies, so didn’t get to take very many pictures.
Thursday evening was the Replica Prop Forum annual meetup. I wore my Hoth Leia with newly completed vest!
Friday, I wore the Warrior Wonder Woman from the upcoming Batman vs. Superman Movie. Post here
Saturday, for the parade, it was my new Steampunk Wonder Woman costume. This was also worn to the annual Wonder Woman photo shoot where George Perez (WW illustrator) usually participates! We got to chat a little bit, but I don’t remember saying much ;0
Sunday, I had planned to wear Bandit Snow White from Once Upon a Time, but was worn out and went home. I am saving this for a cooler weather event.
Finally, Monday, I just took my older daughter and wore street clothes. I was lucky enough to have had my Astharoshe Asran costume featured on display for the costuming track, so also had to pick that back up. I can’t believe I actually made it through four days!
The girls wore a little mini Starfire from Teen Titans Go! and a TARDIS / Dr. Who themed outfit. They don’t do very well waiting in all the lines, but had a blast!
Till next year!
This is my favorite Leia outfit and have been wanting to make it for years. Unfortunately, I never could find a vintage white snowsuit, so had to start from scratch! Here are a few of my favorite reference photos that I used (as well as the Padawan’s Guide). It is basically a white suit with belt and quilted panels with a cream vest and grey boots. As of now, the costume is not complete because I
had to wanted to wear it before the vest was finished! I will update the bottom of the post once the whole thing is complete and I have more photos 🙂
I had made a pattern for a one piece suit when I did the Dune still suit that was about my size, so this is what I started with. It took many alterations once pieced together, but was easy to do since it was for me! It was a vintage pattern from the 80’s merged with the “Elvis style” zip front suit pattern.
The wrist communicator and the ID for the vest were made out of sculpy and hand painted with acrylics. I used reference photos found online for these and just made sure to make my pockets for them fit the areas on my patterns. I glued them onto fabric squares that were smaller than the outlying edges of the pieces, then sewed the fabric onto the correct places on the suit.
The taupe/grey boots were a score on ebay. It was hard to find ones that were leather, with a wedge heel, and in my size, but I got lucky one week. I made simple grey vinyl covers that were open up the front and added velcro strips around to hold them in place.
To make her hairstyle, I just made two long braids behind the ears and wrapped and tucked them around. I had ordered a “braid headband” that did not arrive on time, but my hair was just long enough to look ok without it.
The scuply pieces were finished weeks before these shots, but had to do the suit in just one day! I sort of want to go back and redo a few things.. finish it nicer, but think it will probably have to do. Here are some of the shots
More to come shortly!
Here is a photo of the finished vest… Later this year I will be able to add more pictures of the completed suit.
Little Elsa and Batgirl walk the “Wild Rumpus” downtown Athens
Photo by Blane Marable
I made this from Duck tape! It was so fun to be Batgirl. I will add a tutorial on how I made this soon 🙂
Batgirl and “mean Johnny” from Karate Kid. The bodysuit, belt, gloves and boots arrived on Halloween morning. Luckily, I had the bat emblems, cape, and cowl ready to go!
Mine and their best friends all wanted to be a “Frozen” troop this year, OF COURSE. Here are older Elsa and Anna.
Elsa had a removable glitter painted cape, and my daughter painted the Anna skirt herself!
Olaf. She glued all the cotton balls on her “flurry cloud” by herself!
The Whole troop!
Blane Marable also caught a picture of my friend in my Monet Waterlillies painted dress
Young Anna in her green outfit.
Halloween 2014 was the best one yet. I had so much fun making all of our costumes, walking in the Wild Rumpus parade, getting a night out on the town, and continuing the celebration the next day with our annual Halloween/Football party.
So, I fell in love with this character after randomly coming across this drawing. I am not a huge “vampire story” fan (never read nor saw Twilight.) I don’t think I have ever read ANY vampire story, actually! This ^^ inspired me to pick up both a manga and novel of Trinity Blood. I ended up liking a LOT of the characters and their amazing wardrobes 🙂 Having never done any sort of vampire or armor of anything besides leather, my long term project was chosen!
First, came my favorite part…sketching!
Then, since I knew the fabric part would be easier for me, I started some simple and cheap armor. No worbla for me yet…investing that much money in an experiment was too scary! I just used a tee shirt and duck tape on my mannequin for the breast plate. I also had mod-podge handy, so did many coats of that over the tape to even out the ridges and ugly lines. It was not fun and only did a coat or so a week. This is why this costume ended up being so drawn out!!! UGH.
Then, months later, I had more time and a renewed interest in the costume. I left the “armor” alone and started patterning the eyelet underdress and velvet jacket. This was much easier for me and much more fun.
Jacket and over corset pattern
Simple “eyeballed” underdress from a basic corset pattern, strapless with a zip back
Once I got rolling on the jacket and gathered up ALL of my spare gold braided trim, I didn’t stop to take many photos!
Above is the back of the jacket and under bust corset.
This shows the underdress and starting work on the design at the bottom of the jacket. I was going to hand embroider the whole panel, but switched to trim and paint since I wanted to actually complete this thing!
I WAS able to do some embroidery on the sleeves:)
This is gold metallic leather, and is the upper portion of the puff sleeve.
While I was working on the arm bands, I got inspired to finish up the armor. Here are the two shoulder pieces and the front pieces with the leather arm bands. I tried some foam for the shoulders and torso parts of the armor and they worked out to be sturdy enough once doubled up and duck taped! I used puffy paint to make the designs mostly! The torso pieces are only attached at the top edges, so the armor bends with motion. I used a lightweight chain and studs to attach the front armor to the shoulder pieces and then to the back to meet at the center point of the corset where they attach with a clip! I finished it all up with a little silver paint over the bronze and her gems.
Lastly, I painted the decorations down the sides of a pair of red tights, gathered some of the eyelet for a neck ruffle, added some lace and buttons to some thigh high flat white boots, made a red sash/little wallet and made the hat. I don’t have a picture of the hat in progress because I was trying to finish it quickly in time for DragonCon…I used a vintage cap, and pieces of plastic mesh covered in my blue velvet to construct a simpler/smaller version of her huge one. My daughter dyed a strip of the white wig red for the signature stripe and we are done!! The last minute things really added up, haha!!
Hat, wig, and ruffle.
Armor on without the final armor touches
At the convention, very happy after 10 hours in FLAT boots and no armor! ….Next time 🙂
This was a fun project to embark on, and took some major research before even starting to pattern!
The stillsuit is a full body suit worn in the open desert that was designed to preserve the body’s moisture. It consisted of various layers that would absorb the body’s moisture through sweating and urination, and then filter the impurities so that drinkable water would be circulated to catchpockets. The individual could then drink the reclaimed water from a tube attached to the neck. A stillsuit, kept in working order and maintained properly, permitted the wearer to survive for weeks in the open desert.
Since this was for a woman customer, we used the screen used one found on propstore for reference:
It was worn by the Character Chani
After thinking and looking into several different materials and patterns, and a couple of good prop store pics, along with great input from my customer, I came up with a plan. A merged jumpsuit pattern, celery Moire fabric, grommets, and parachute cord!
I used a basic 80’s vintage jumpsuit pattern and altered it to include the high neckline with collar. We found the perfect fabric on ebay called a Moire which has the patterned grains in it, but it would not bleach, so I used acrylic fabric paint to give the pieces the look of the sun bleached sweat marks. (they show up pretty yellow in these pics, sorry)
I luckily remembered that all of the grommet holes for the “veins/tubes” had to be set BEFORE I sewed the pieces together! I also added the ruched knee and shoulder pads a front zip and the flap before sewing.
Almost finished. I added pale blue (distressed) paracord through the grommet holes, the logo pocket, and webbing straps at one shoulder and the upper waist. It also had a ruched waistband. Not shown in these photos is the webbing belt that is the third belt of sorts on this suit!
Close up of the front flap
I couldn’t get the thing on my mannequin that has a head, so had to fit the wrap around facemask/cap on myself!
And FINALLY, my customer (with the hood hanging back). It was a treat to run into her at DragonCon and see the suit on her 🙂
Happy customers love to share photos of themselves with me in their costumes and I love to see them! Here are a few that I have received in the last year or two. If I have missed any credits, please let me know!
Cosplayer Kuno Yuro
Kuno Yuro as Wonder Woman, with Batman 2014
Nicole Stoufflet with her Steve Trevor 2013
MiaLa bustier made with custom molded chest plate and belt. 2013
Two more great shots of Kuno Yuro
This unnamed customer claims her costume was “A LOT of work.” Meh. It wasn’t that hard. Maybe she meant getting in shape to wear what I made was hard 😉